Ep 6112 Epoxy Potting Compound, Flame Retardant Encapsulating Compound Sealant
 
∎Product Description
Ep6112 is two-component solvent-free type flame retardant room temperature curing epoxy potting adhesive with high thermal conductivity, cured at room or heat temperature.
 It’s designed for pouring and protecting Auto mobile parts and supply physical strength to the elements, where excellent properties and exceptional thermal shock at elevated temperatures are required.
 
∎Typical Applications
●For encapsulating and potting of flame retardant for small and medium-sized and closing of the circuit board, such as capacitor coating, solid state relay potting, etc.
 
∎Key Features
1. Good toughness, high hardness
2. Excellent adhesion, anti-cracking resistance
3.Excellent electrical insulating properties, stability 
4.Good waterproof, moisture resistance, very low water absorption
5.Good temperature resistance, resistance temperature of 150°C in 1-hour short time
6.High thermal conductive rate
7. After curing flame retardant UL 94 V-0
 
∎Packing Specification
Part A：25 kg/ drum
Part B：5 kg/ drum
Other size required should be quoted.
 
∎Transport &Storage
● When stored at or below25°C in the original unopened containers, this product has a usable life of 12 months from the date of production. Sampling test is necessary for products which exceed shelf life before taking use. During storage may have little settlement stratification, stirring evenly when use, does not affect performance.
It’s non-dangerous goods, can be transported as normal chemicals, CAUTION leakage during transport.
 
.∎Directions for Use
Stirring A component evenly before taking use.
Mix A, B two components with 5:1 mass ratio, stir well and do vacuum defoaming before potting to components.
If necessary, continue to vacuum defoaming for components which been potted, help to increase the electrical performance of the device.
Curing conditions: Preliminary curing time is 8 hours at room temperature, completely cured need 24 hours; also can be heat curing, in 80°C for 2~3 hours.
The above tests are measured under 120g mixture of adhesive.
 
 
∎Attention of operation
●Keep away from Children
●Avoid contact with eyes and skin. If contact with your skin, scrub first with soap water or alcohol, then rinse with water. If contact with your eyes, rinse with plenty of water, and seek medical treatment immediately.
● It is forbidden to build on the surface of the wet substrate.
 
If you have the order request, please contact us directly firstly. and please don't place the order directly. Thanks.