Maxtech PU1812 Car Body Sheet Metal Polyurethane Sealant
∎Description
●PU1812 is one component moisture curing polyurethane adhesive for all kinds of sheet metal bonding and sealing.
Sealing and bonding of ventilation ducts, gutters and spouts etc. Sealing of sheet metal seams; For vibration reduction in all type of sheet metal assembly works
∎Key Features
●Primerless
●Excellent thixotropy, non-sag properties
●Excellent adhesion and wear-resisting property
●Cold application
●One-component formulation
●Excellent extrudability, easy for raked joint operation
●No oil permeated
●Paintable and polishable
∎Areas of Application
● Mainly used for welding seam and sealing of automobile, railway passenger cars, ships, cold storage container, van body of the refitted vehicle, etc.
● Waterproof, dustproof sealing of refrigerated container, construction and pipe.
● For vehicle sheet metal repairing, aluminum gusset and bodywork sealing.
∎Technical Data Table
PERPORTY VALUE
Chemical base 1-C polyurethane
Colour (Appearance) White/Gray
Cure mechanism Moisture curing
Density (g/cm³) (GB/T 13477.2) 1.3±0.05g/cm³ approx.
Non-sag properties(GB/T 13477.6) Very good
Application temperature 5°C to 35ºC
Tack-free time1 (GB/T 13477.5) 20~60mins
Curing speed (HG/T 4363) see diagram
Shore A hardness (GB/T 531.1) 40±5 approx.
Tensile strength (GB/T 528) 1.5N/mm2 approx.
Elongation at break (GB/T 528 ) ≥350%
Extrudadbility (ml/min) >100
Tensile-shear strength(MPa)GB/T 7124 3.0 N/mm2 approx.
Volatile content ＜4%
Service temperature 30min @180°C , long time @ -40~80 °C
Shelf life (storage below 25°C) (CQP 016-1) 9 months
∎Direction for use
Tool: Manual or pneumatic plunger caulking gun
●Cleaning: Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating.
●For cartridge
1.Cut nozzle to give the required angle and bead size
2.Pierce the membrane at the top of the cartridge and screw on the nozzle
3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength
●For sausage
1.Clip the end of the sausage and place in barrel gun
2.Screw end cap and nozzle on to barrel gun
3.Using the trigger extrude the sealant with equal strength
●Apply Maxtech PU Sealant
For Automotive Car Windscreen/Windshield in a continuous bead using constant pressure to apply the sealant
∎Attention of operation
Wear suitable protective clothing, gloves, and eye/face protection. After contact with skin, wash immediately with plenty of water and soap. In case of an accident or if you feel unwell, seek medical advice immediately.
This is professional auto glass glue, it is high viscosity ( thick ) , so a caulking gun will be required to apply the glue. If you using a regular ( not a professional ) caulking gun to apply the glue, please make sure to warm the glue up by using the hair dryer for 15 mins . Please do not stock it in cold place so the glue will freeze and very hard to apply.
∎Packing & Delivery
Wear suitable protective clothing, gloves, and eye/face protection. After contact with skin, wash immediately with plenty of water and soap. In case of an accident or if you feel unwell, seek medical advice immediately.
600ml Sausage Packing PU sealant
600ml Polyurethane adhesive sealant for automotive
PU sealant with tube packing
310ml tube : 20pcs per box, 2 box per carton
∎Pallet Packing :
310ml tube: One pallet can bear 56 CTNS, 2240pcs. One 20ft Can bear 10 pallets.
600ml Sausage: One pallet can bear 42 CTNS, 1680pcs. One 20ft Can bear 10 pallets.
∎Delivery time :
Normally order, the delivery time is around 10-15days.
Samples: 2-3days.
∎Transport &Storage
* Transport: Keep the sealed product away from moisture, the sun, high temperature and avoid collisions.
* Storage: Keep the sealed product in a cool, dry place.
* Storage temperature: 5~25℃. Humidity: ≤50%RH.
* Cartridge and Sausage:9 months. Pail/Drum:6 month.
